Viper Woven 10 Mil Vapor Barrier | 800 and 1200 SQ FT
$225.00 – $330.00
Are you searching for a Plastic Vapor Barrier with a remarkable Perm rating and lightweight? Viper’s Woven 10 Mil Vapor Barrier is lightweight and it’s.0016 Perm rating is much lower than products twice as heavy.
How Important is a Vapor Barrier?
Vapor barriers are used for damp-proofing your basement or crawl space. The barrier resists diffusion of moisture. This resistance prevents interstitial condensation and water damage. When your crawl space or basement is not insulated correctly, your home is in danger of water vapor, mold, mildew, and more.
Additionally, vapor barriers provide a cost-effective, long-term solution to damage caused by water vapors. With the Viper Woven 10 Mil Vapor Barrier, you can rest assured your basement, and crawl space are receiving the best protection from condensation.
About The Viper Woven 10 Mil Vapor Barrier
The Viper Woven 10 Mil Vapor Barriers exceed all ASTM E1745 Class A, B, and C requirements for under-slab vapor retarders. How? It’s all about the weave. Our product is made of a white, triple-ply, and extrusion coated, virgin Polyethylene membrane. Additionally, the Viper Woven is made of new materials, including woven fibers with the highest strength to weight ratio.
Furthermore, our barriers offer better puncture resistance and tensile strength than any competitor on the market.
We offer the Viper Woven 10 Mil Vapor Barrier in 4’ x 200’ (800 FT2) and 12’ x 100’ (1,200 FT2).
Where does the vapor barrier go?
Vapor barriers work best on floors and walls where water is most likely to gather. In walls and ceilings, there is a risk of condensation building. Therefore, the goal is to control moisture migration as well as prevent the harmful effects of radon, moisture causing wood rot, mold, mildew, and poor indoor air quality.
When installing the Viper Woven 10 Mil Vapor Barrier, you’ll want to place our product on the side of the wall which experiences hotter temperature and moister conditions. Sealant tape can keep the barrier in place. Additionally, our product can be placed on ceilings, walls, and floors, or around pipes and columns.
Need better protection for your basement crawlspace? Order a Viper Woven 10 Mil Vapor Barrier today!
|Viper Woven 10 Mil Vapor Barrier||Results|
|Weight (per msf)||N/A||36 LBS|
|Classification||ASTM E 1745||CLASS A, B, C|
|Tensile Strength (new material)||ASTM E 154, SEC. 9||136 LBF/IN (MD)|
|134 LBF/IN (TD)|
|Tensile Strength (after soaking)||ASTM E 154, SEC. 9||140 LBF/IN (MD)|
|133 LBF/IN (TD)|
|Tear Strength||ASTM D 751 TONGUE||54 LBS. (WARP)|
|57 LBS. (WEFT)|
|Grab Tensile*||ASTM D 751||138 LBF (directional avg)|
|Bursting Strength||ASTM D 751 MULLEN||318 LBS|
|Puncture Resistance (maximum weight sustained)||ASTM D 1709||15,839 GRAMS|
|Puncture Resistance||ASTM D 5602||76 LBS|
|CBR Puncture||ASTM D 6241||626 LBF|
|Maximum use temperature||N/A||180° F|
|Minimum use temperature||N/A||-70° F|
|Water vapor permeance||ASTM E 96 / 154 SEC. 7||.0016 PERMS|
|Water vapor transmission rate||ASTM E 96 / 154 SEC. 7||.0006 GRAINS/FT2*HR|
|* TESTS ARE AN AVERAGE OF MACHINES AND TRANSVERSAL DIRECTIONS|
|10 MIL LINER SIZE|| |
4’ X 200’ (800 SQ FT) White/White, 12’ X 100’ (1200 SQ FT) White/White
Cannot be distributed or sold in the state of California or Alaska.
Due to this item being in high demand this product is limited to 3 per order