Insul-Barrier Walls Insulation System (R-12) 4’ X 25’ (100 SQ FT)
Looking for an easy to install R-12 wall insulation for your crawlspace walls, frost line portion of your basement walls? The Insul-Barrier is exactly what you need and the prices you definitely want!
What Is The Best Insulation For My Home?
The best insulation will protect against moisture, heat, and chill. Additionally, you need long-lasting wall insulation, so you never have to worry about protecting your home. Luckily, the Insul-Barrier Walls Insulation System is an insulated vapor barrier perfect for your crawl space, basement, and attic. The Insul-Barrier includes reflective technology and other insulating layers which deliver optimal thermal performance. This performance keeps unwanted moisture and temperatures from invading your living or working space.
About The Insul-Barrier Walls Insulation System
Our product provides water vapor protection as well as energy efficiency. The five-layers of Insul-Barrier are designed for fluffing. This fluffing aids during installation by ensuring adequate airspace among the layers. Additionally, the two outside Polyethylene skins (outside layers) are designed to protect the inside of the product from damage. The Polyethylene skins also create an effective moisture barrier.
Lastly, one skin is reflective white, and the other is reflective silver. Within the reflective silver, Polyethylen skin is a high-density bubble pack, followed by two layers of high-density closed-cell foam. Then, the protective reflective white surface is the last layer.
The top and bottom are hemmed while the bulk of the “blanket” is designed to separate for airspace.
Our product is made as a single 4’ x 25’ panel, factory-installed grommets space along the top hem allow easy installation.
Furthermore, the Insul-Barrier rolls are easy to handle and maneuver in tight spaces. This maneuverability makes our multi-layer “blanket” wall insulation system perfect for crawlspaces and frost line coverage (top 4’) in basements.
What is a good R-value for exterior walls?
R-Value measures the capacity of an insulating material to resist heat flow. The higher the R-value, the greater the insulating power. Our product is perfect for basements and crawl spaces. Why? Because the R-12 rating means our product prevents moisture trapping, which leads to mold and lower air quality. The Insul-Barrier Walls Insulation System provides enough room for your room to breath while avoiding the accumulation of water vapors, heat, and chill.
Improve Your Home’s Efficiency With The Insul-Barrier Walls Insulation System
Installing insulation is a tricky job. You can over-insulate your home by trapping moisture in your walls. However, our product’s manual can help walk you through the best ways of insulating your home.
Order the Insul-Barrier and provide your home with energy efficiency, cleaner air, and water protection.
|Insul-Barrier Wall System||Results|
|Weight||N/A||10 LBS. / 100 SQ. FT.|
|R-Value Performance (MATERIAL)||ASTM C 1371||R 8.73|
|R-Value Performance (WALL SYSTEM)||ASTM C 1371||R 12 *|
|Tensile Strength (BUBBLE PACK)||ASTM D 412-98||136 PSI|
|Tensile Strength (CROSS WOVEN POLYETHYLENE)||ASTM D 751 (GRAB)||45 LBF/IN|
|Compression Set||ASTM D 3575-00||4.30%|
|Compression Set||ASTM D 3575-10-16||3.20%|
|Bursting Strength (BUBBLE PACK)||ASTM D 751-00 (BALL BURST)||95.1 LBF|
|Bursting Strength (BUBBLE PACK)||ASTM D 751-00 (MULLEN)||90 PSI|
|Tear Strength (CROSS WOVEN POLYETHYLENE)||ASTM D 1922 (TONGUE TEAR)||28 LBS (WARP) 33 LBS (FILL)|
|Smoke Devoped Index||ASTM E 84||20 SDI (CLASS A)|
|Maximum use temperature||N/A||180° F|
|Minimum use temperature||N/A||-60° F|
|Water vapor permeance||ASTM E 96 / 154 SEC. 7||.002 PERMS (CLASS A)|
|Dimensions||15 × 15 × 49 in|